printing scaled in yosemite (?)

Issue report by leigh

Product

FileMaker Pro

Version

12 and 13

Operating system version

Mac OS X 10.10

Description of the issue

I have a database that prints output on a layout sized 3 inches by 5 inches. Two of these will fit on a normal sheet of paper, or I can cut the paper to 5.5x8 inches and print two per half sheet, which is what I normally do.

I tried printing from a newer laptop today (MacBook Pro, purchased in September) that is running Yosemite for the first time. The items printed, but they are about 1/4 inch off in size. More like 2.75 inches x 4.75 (or a little less in the long direction). I checked the scaling, and it is set to 100 percent. I sent the job to another printer (both are HP4014n), and got the same result. This was in FMP advanced vs 13. So I closed the database, opened it up in FMP Advanced vs 12, and got the same result. So I put the database on a thumb drive, opened it on a different computer that is still using OS X 10.9 instead of 10.10, and the file printed at its expected size (3x5) instead of smaller.

Steps to reproduce the problem

Nothing needed to reproduce problem; it seems to just print shrunken from my computer that is running OS X 10.10.

Workaround

printing from OS X 10.9 worked as expected.